onetrack

Scott knows a lot about Space. He's got plenty between his ears.

Is there a part number on the correct one? GM parts nearly always have the part number cast, embossed or stamped into them. I'll have to dig out my old 1930's Chevy master parts book and see what I can find by way of numbering. Yes, there's always a staggering range of parts differences in GM/GMH vehicles, even though you think they should be the same part. But GM always swapped parts between models and makes, and often, after the part had become "obsolete" on the initial model. Not many people know that FE/FC Holden interior door handles, are the same as the '57 Chev cars interior door handles. The late 1950's Bedford trucks used the same cabin as the late 1940's/early 1950's Chev trucks. And I've seen an example where a stainless steel door trim was used on the upper door of one GM model (can't recall if it was Oldsmobile or Pontiac), and a couple of years later, the same trim was used as a lower door trim on the opposite side of the Chevy. I've read where doors, glass and boot lids can also be interchangeable between GM/GMH models. A Slav-ancestry mate is a crazy, obsessive hot-rodder, and he has a 1950 Oldsmobile hot rod. He found an EJ Holden front seat was a perfect fit for the rear seat in the Oldsmobile!

It's the first time I've ever seen a Police patrol car look small! Normally, they loom twice the size of any any other car, in the mirror!! 😄

And if you want up-close and clear photos of the BIG Chamberlain, just to understand how BIG it really is, then the Guardian has them. You'd have to admit, the steel workmanship is pretty impressive. https://www.theguardian.com/australia-news/2024/oct/08/giant-red-tractor-carnamah-wa-australias-big-things

Product Review is a good place to see real customer opinions about the products they've purchased. Look up BYD cars on P.R. Discount all the 5 star reviews, as they're company shills, and look at all the remaining owner reviews. A lot of very unhappy customers, with complaints ranging from poor driving qualities, lack of warranty support, excessive amount of faults in the cars, breakdowns, poor dealership and company backup, and many complaining they never even got a thank you, or a cuppa from the dealer! https://www.productreview.com.au/listings/byd-australia

7 - 4 girls and 3 boys.

Nothing that any of you are saying, disagrees with my previously stated opinion of Albo, long before he was elected - he's not a leader, and he's certainly not a Statesman.

7.

If you ever smash one of those Twilite glass lenses, contact me, I have several of them that I collected many decades ago. The Americans ask around US$65 each for them, and the postage cost is about the same amount.

I bet the person who assembled it, didn't miss a beat.

We had our big Jacaranda in our backyard pruned several months ago. It was done by a team of three arborists, two young blokes and a young girl. They were extremely professional and hard working, using a heap of professional tree climbing equipment, because there was no way they could get a cherrypicker into the backyard. The bloke doing the lopping trimmed several overhanging branches (into neighbours yards), and cleaned out a pile of dead branches in the middle of the tree. They supplied a truck and big chipper, they mulched everything, and took all the mulch away. The eldest bloke and the girl lugged all the branches and trimmings out to the front, and put them through the chipper. They quoted (estimated) $2500, but said it could cost less, depending on what they ended up having to do. They were very efficient and finished in a few hours and charged us $1841. After they left, they got a heap of work from others around the area who saw them working - including a deadbeat demented neighbour, who got them to cut down nearly everything in his backyard!

It's interesting that the '32 Chev truck used the '31 car bonnet. The '32 car bonnet has 4 small hinged doors in the side panels, not louvres. Those Twilite headlights need the reflectors resilvered. It looks very nice, wooden framed cabs and bodies are a pain to rebuild. They built the wooden frame, then took the panels and hammered them into place over the frame. Every panel was a different size, you can't take a door off one wooden bodied vehicle and fit it to another, they're made to fit the particular body they came off. Everyone thinks the factories were really particular on their choice of wood, but that's rubbish. The factories used any wood that would do the job, and when wood supplies got tight, they'd gather up fallen dead timber, and saw that up.

The earlier GM diesels weren't too bad on fuel because they ran at 1800-2000RPM. But the later models ones were "souped up" to meet the increased output of other engine manufacturers and they started pulling 2400-2800RPM. Once you go over about 2200RPM with a diesel, the fuel efficiency suffers - diesel is a slow-burning fuel, and at high speed, it doesn't get time to combust fully.

I saw a good name on a boat today - "In A Meeting". I reckon another good one would be "My Way". When you get a call, and the caller asks, "Where are ya?", you could honestly say, "I'm on My Way!" 😄

The undercurrent of racism and hatred of people who "don't belong to our tribal group" is always there, in every society on Earth. "You ain't from around here, are ya, stranger?? It bubbles up into poorly-aimed anger by those feeling like they're being overrun by "different" people with different colour skin and strange cultures. It's fomented by people with an agenda and a need to gain power. We had a local bloke by the name of Jack Van Tongeren, a "lower socio-economic type" of Dutch ancestry, who felt oppressed by the number of Asian immigrants he didn't like. He formed his own little Nazi group and gathered up a bunch of poorly-educated simpletons who were prepared to listen to and follow his aggrandising speeches and meetings and printed literature. They tried to pull Nazi-like oppression and plastering their nasty messages around the place - but when he did a firebombing of an Asian restaurant, and indulged in criminal actions such as robberies to finance their group operations, it brought a swift reaction from law enforcement. The group eventually murdered one of their own followers who "grassed" on them. Van Tongeren served 13 years of an 18 year sentence in jail - but he never recanted his position as an Asian-hating Nazi, and probably still spreads his poison today. Van Tongeren joined the Australian Army as a young man and served in Vietnam, which might have affected his mental outlook, but I think he was warped from a young age. Unfortunately, his Army training and Vietnam War experience made him quite dangerous, and if he hadn't had that training and experience, his whole setup would simply have been amateurish. We have to watch those with Nazi leanings who have military experience and training, as they can be quite skilled in many areas relating to overthrow of civil society. https://en.wikipedia.org/wiki/Jack_van_Tongeren

David Brown made pretty good transmissions and gear trains, but when they tried to extend their skills to building entire tractors, they couldn't match the tractor manufacturers who'd been in the business of designing entire tractors for multiple decades.

Willie, what's that horizontally opposed donk you've got there, it's not a Lycoming is it?

I've never seen anyone shut down by the ATO at 24 hrs notice unless major criminality was involved. The ATO prefers to have a negotiated settlement, unless it's obvious the tax defaulter is intent on major rorting, and continuing tax avoidance.

Had a taste of Summer yesterday, it got to just over 31°, with a very warm N/NW wind. Much cooler today, with low cloud cover and 24° forecast, with a SSW/SW light wind. Light rain coming again next week, with Wednesday looking like we'll get a few mm. The BOM is forecasting one of the hottest Summers on record to come, for 2024/25! https://www.abc.net.au/news/2024-10-12/australia-facing-one-of-hottest-summers-on-record-bom/104464014

They're simple people, those Carnamah folk. They understand big is good, bigger is better, orange is good, and Orange Tractors are the best! The 40KA sold well, because the engine ran on Power kerosene, which was cheap and reasonably efficient, and the engine was a simple, low speed (1200 RPM) horizontally opposed twin. Bob Chamberlain also struck it lucky on several fronts - he saw the massive pent-up demand for tractors in the period right after WW2, when many soldiers took up farming, and developing farms from bush. The wool boom, and a little known accompanying wheat boom (wheat doubled in price between 1950 and 1952), all added to increased tractor demand. Chamberlains acquired a former Australian Govt munitions factory in Welshpool for a fraction of the cost it took to build it. The factory was well served with an excellent power supply, a big furnace, a rail line, and a main road. Bob couldn't afford costly Swiss gear-tooth-polishing equipment, so the Chamberlain transmissions were left with machining marks in the gears that produced loud whines when the gears were hardened. Not a lot of farmers worried about the noise the Chamberlain transmissions made, the tractors were made locally, supported with spares and factory backup, and they were readily available, unlike many other imported brands. Bob did well with the horizontally-opposed kerosene engines, but when he tried to make the engine into a diesel, it was a disaster. The diesels blew up regularly, because of faulty design that didn't take into account the vastly increased stresses on engine components caused by the higher energy level of diesel fuel, and the much higher compression ratio needed to ignite it. The answer was to buy in "brand name" diesel engines in the form of GM diesels and Perkins and Meadows diesel engines. These engines proved to be winners, but the noise the Chamberlains made didn't decrease! - in fact, with the GM diesels, noted for their 2-stroke scream from their Roots blower, the Chamberlains only got noisier! But regardless, the Chamberlains are fondly remembered by anyone who has had anything to do with farming - and many thousands of them are still running today, testament to their fundamental reliability and simplicity.

The GST was touted by Little Johnny as a simpler and fairer tax. It's not, and the complexities of GST calculations now far exceed the original taxes it replaced. The GST taxed a lot of "black money" and drug money that formerly escaped taxes, because eventually, "black money" and drug money has to be invested in areas where taxes are applied. One of the things that got up my nose is that the Govt gained a huge windfall in GST from the sale of used goods that were formerly untaxed. Jerry, I trust you're not actually saying that millionaires and billionaires need to pay more tax?? God forbid, Gina Rinehart is struggling on her $37B worth of assets, give her a break!

Peter, I've been pretty busy, so not a lot of time to answer brain teasers. It's warming up, and things are happening, and I have a backlog of jobs/projects to catch up on.

The size of the U.K. market would mean the Tim-Tam distributors and retailers there, would be able to negotiate a better price for Tim-Tams, based on a substantially-increased volume of Tim-Tams. The Australian sales levels are probably less than a quarter of U.K. sales levels. And despite the freight cost to the U.K. that would initially appear to be sizeable, containerised transport via ships is relatively cheap, especially when a client is a sizeable, regular, repeat client. The cost of transport within Australia is quite high, because we freight goods on trucks, and despite using road trains, the cost per item is high, due to the fact that trucking is actually a high cost freight method, as compared to ocean shipping. I got freight quotes recently to move a 600kg generator set from NSW to W.A., and the charges were vastly more than I expected, and one of the quotes had a fuel surcharge of 28% added to it!! The quotes ranged from around $2500 to around $5000, and it's a compact heavy gen set, so ideal for the trucking companies.

Well, the latest EV news has one simple message - the Chinese have won. In disconcerting news for the major Western car brands that have set up huge production factories in China, producing "Brand Name" cars for the Chinese market - whereby these companies generated huge company profits from this process - the Chinese buyers have now taken to the locally-produced EV's and hybrids, obviously seeing good value in them - largely due to pricing, too, no doubt. BMW sales in China have dropped by 42%, and Mercedes, VW, and Audi are going the same way - and there's real panic in the boardrooms of these companies, as they see their massive Chinese-built vehicle profit levels evaporating, under the Chinese car manufacturer onslaught. The solution to these manufacturers is obvious - climb into bed with the enemy, and use their manufacturing base and massive abilities, to produce "badge-engineered" models. In the past, design and development of the Brand Name models was carried out in Europe, along with procurement and oversight of suppliers. In the near future, virtually everything will be done by the Chinese, under Brand Name management and oversight. The Brand Name companies manufacturing facilities in Western countries will eventually be reduced to a shell of what they once were, as the Chinese come to totally dominate the vehicle manufacturing industry, on a scale that no-one could've envisaged, as little as only 5 years ago. https://kr-asia.com/can-prioritizing-china-reverse-the-ailing-fortunes-of-luxury-car-giants-bba

The wives and girlfriends suffered because they had no idea what their husbands/boyfriends had experienced. I can recall one woman relating a story where she cooked her recently-returned, WW2, ex-POW (of the Japanese) hubby, a beautiful rice dish for dinner. Once placed in front of him, her hubby exploded in rage and threw the meal against the wall of the dining room, abusing her, and telling her she was NEVER to serve him rice, ever again. The poor woman was devastated, she had no idea that a serving of rice would produce so much rage from her hubby, that she loved - but of course, he hadn't talked about what he'd endured as a POW, and no-one else had prepared her to understand what she would likely have to put up with, from her war-damaged hubby.