Jump to content

Titanic Sub missing


spenaroo

Recommended Posts

anyone else following this.

 

the engineering on this thing is absolutely terrifying.

using carbon fiber in the hull - without any tests for defects or cracking
using a view port rated for 1/4 of the depth planned

using flammable material's for construction

all this in a 2018 lawsuit for wrongful dismissal after they fired the guy in charge of quality after he refused to sign off in it for testing

https://www.cbsnews.com/news/titanic-submarine-oceangate-hull-safety-lawsuit/

  • Informative 1
  • Confused 1
Link to comment
Share on other sites

yep,

most likely the carbon hull has imploded from fatigue, dead before the nervous system can process anything.

its one thing to make the dive once or twice... but repeatedly. 
like aircraft material fatigue is a huge issue.

  • Informative 1
Link to comment
Share on other sites

 A submersible designer knows exactly what pressures it will have to withstand at any selected depth It doesn't change suddenly or experience turbulence and big temperature changes either but the pressures are LARGE. Something like 150 tonnes per square inch I believe. Nev

  • Informative 1
Link to comment
Share on other sites

I'm with Marty, these blokes are stuffed. The chances of finding the submersible before they run out of air are virtually nil, and if they do, then they have to try and recover the thing and rescue the blokes!

And what insanity drove the idea of bolting the hatch on from the outside, with no way for the occupants to open the thing up, if they actually reach the surface? You couldn't write a horror movie plot this bad.

  • Like 1
  • Agree 1
  • Sad 1
Link to comment
Share on other sites

I fail to see the attraction. Paying $250,000 and putting your life at extreme risk to see a rusty sunken boat. If anything goes wrong, it's not easy to get rescued in a 6,000 psi environment.

 

As a comparison, when the stratospheric joy flights were running, for $20,000 you got a flight to 56,000' with aerobatics on the way back down, all visas, permits, transfers, pre-flight training and health checks, professionally edited video record of the flight and hotel accommodation. See the curvature of the earth at high altitude in relative safety, and if anything does go wrong, you have a bang seat with enough oxygen to get you back to solid ground. The rusty boat just doesn't stack up.

  • Like 2
  • Agree 1
Link to comment
Share on other sites

10 hours ago, onetrack said:

I'm with Marty, these blokes are stuffed. The chances of finding the submersible before they run out of air are virtually nil, and if they do, then they have to try and recover the thing and rescue the blokes!

And what insanity drove the idea of bolting the hatch on from the outside, with no way for the occupants to open the thing up, if they actually reach the surface? You couldn't write a horror movie plot this bad.

probably the same guy that allegedly adding and EPIRB wasn't worth the extra weight.
and is on record as saying that nothing on it is certified, as certification stifles innovation and there is too much "unnecessary additions" needed to do it.

  • Sad 1
Link to comment
Share on other sites

4 hours ago, spenaroo said:

probably the same guy that allegedly adding and EPIRB wasn't worth the extra weight.
and is on record as saying that nothing on it is certified, as certification stifles innovation and there is too much "unnecessary additions" needed to do it.

Might he be the type who would decide he can last five times longer if only he stops others breathing?

  • Sad 1
Link to comment
Share on other sites

Their oxygen runs out at 8:00PM AEST. They're beyond saving at this point, it's just going to be a body recovery operation now.

 

That company is going to disappear under billion-dollar compensation claims, from the best lawyers billionaire families can employ.

Link to comment
Share on other sites

It sounds like the sub was a disaster waiting to happen. A bit of a rough show; the ballast was building site waste material balanced on outer pylons. To release the ballast, the crew all move to one side so the weight falls off. No seats or toilet facilities, just sit on the floor.

  • Like 1
Link to comment
Share on other sites

Reporting is that there were concerns about the vehicle's safety from experts in the field.

 

I'm not sure how you create a pressure vessel out of carbon fibre cylinder capped with steel hemispheres at each end and not have weak spots where the different materials join, when you're facing massive external pressure.

 

Surely the best design would be a steel sphere with no external windows?

  • Like 1
  • Agree 2
Link to comment
Share on other sites

The simple problem was the designer was a "rip-tear-bust" merchant who wasn't prepared to submit his design for any independent oversight or classification by marine experts or agencies.

 

There's plenty of good reasons why stuff that goes in the water, or under the water, all have a plethora of construction rules, codes, classifications, etc - so the design can be thoroughly checked out and approved.

 

What a bloody waste of multiple-skilled, highly-qualified lives, and multiple millions in the whole exercise, including the SAR efforts.

  • Agree 2
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...