spacesailor Posted February 11 Posted February 11 The model 3 Tesla I was in ' did NOT ' have a " park lever " . Only a "park release " button, on the " turn indicator " . spacesailor 1
octave Posted February 11 Posted February 11 1 minute ago, spacesailor said: The model 3 Tesla I was in ' did NOT ' have a " park lever " . Only a "park release " button, on the " turn indicator " . spacesailor Yep, I can confirm that. I don't see that as a problem though. It is an incredibly easy and pleasant car to drive. 1
spacesailor Posted February 11 Posted February 11 I ' amost ' got that Tesla ride but . No handbrake . Only to find the same in a Mazda. ( one no handbrake & the other a footbrake. spacesailor 1
octave Posted February 11 Posted February 11 1 minute ago, spacesailor said: No handbrake . When you say it has no handbrake you surely mean it does not have a lever, ratchet, and cable. It does have a handbrake, just not the kind that you are used to. My son lives in Wellington and his driveway is incredibly steep thus far the Tesla hasn't left the premises without a driver. 1
spacesailor Posted February 11 Posted February 11 (edited) " HAND " operated brake . Not much good if you " jump in " to move / return the vehicle . Only to find it's wheels are locked . oK with a front wheeler as you could " drag " the locked rear end around. spacesailor Edited February 11 by spacesailor It changed my spelling 1
onetrack Posted February 11 Posted February 11 It appears Nissan Patrols have a handbrake problem, too! It looks like you can't find their handbrake easily, or even apply it! https://www.abc.net.au/news/2024-02-10/unattended-brand-new-car-rolls-through-carrickalinga-home/103452168
red750 Posted February 11 Posted February 11 I like the handbrake, use it all the time (manual transmission car). Like the cyclic control in a helicopter. 1 1
spenaroo Posted February 11 Posted February 11 My handbrake in the midget doesnt work. and the Amarok's I dont trust. have to yank it all the way up. but both are manual so I just part them in gear and heel toe on hill starts. 1
facthunter Posted February 12 Posted February 12 It would have worked when new on the Midget. You might need new cables (on top of everything else). You are in a rusty environment. Nev
nomadpete Posted February 12 Posted February 12 Hey Jerry. Looks like everybody put the brakes on your 'get rich quick' car impoer business!
spenaroo Posted February 12 Posted February 12 1 hour ago, facthunter said: It would have worked when new on the Midget. You might need new cables (on top of everything else). You are in a rusty environment. Nev Yeah, I believe the issue is with the adjustment screws. the whole brake system should be replaced, its on the list of future repairs.
facthunter Posted February 12 Posted February 12 The Prices of the Parts you quoted are pretty cheap The adjuster screws may be jambed. I think the wheel cylinders are of aluminium. One each wheel in the rear. Use softer lining in the trailing shoe.. Nev 1
spenaroo Posted February 12 Posted February 12 (edited) Yeah, at this time the priority is moving house next month. then building the shed. for about $500 I can get new drums rear and discs front. which is likely the option ill take. with it being bolt on and off. probably should do braided lines at the same time. the original lines need replacing too Edited February 12 by spenaroo 1
old man emu Posted February 12 Posted February 12 My handbrake was not working and the uninspected diagnosis was that the cables were rusted in. Once things were undone, the cab;es were found to be able to move freely. The problem was that the levers at the brakes were tuck. A bit od penetrating oil and assistance with a big screwdriver as a lever soon freed them up. I'm glad it wasn't the cable - $136 each!!!! 1
facthunter Posted February 12 Posted February 12 I don't think I'd bother with braided brake hoses on a car. On motorbikes ..Yes, because they aren't power assisted (Vaccuum) and you're dealing with smaller volumes of oil. and less force from a hand. Nev 1
Litespeed Posted February 12 Posted February 12 1 hour ago, facthunter said: I don't think I'd bother with braided brake hoses on a car. On motorbikes ..Yes, because they aren't power assisted (Vaccuum) and you're dealing with smaller volumes of oil. and less force from a hand. Nev I would replace them either all new brakes hoses or a full braided set. The cost difference is little. The old hoses swell and take up most of the pressure leaving little for braking. I have replaced them in cars and bikes with a big difference in feel and modulation. Worth the effort
old man emu Posted February 12 Posted February 12 4 hours ago, facthunter said: don't think I'd bother with braided brake hoses on a car. 2 hours ago, Litespeed said: would replace them either all new brakes hoses or a full braided set. What I was talking about was not the hydraulic lines to the brake cylinders, but the cables running from the handbrake lever to the brake assembly. 1
Jerry_Atrick Posted February 12 Author Posted February 12 On 09/02/2024 at 12:06 AM, spenaroo said: however the turn-off cylinders, and start and stop devices kill engines. horrible for oil lubrication systems. Not sure about turn off cylinders, but start stop is fine for cars, according to the engineering channels I follow, and here: https://www.rac.co.uk/drive/advice/emissions/stop-start-engines-common-myths-busted/ 1
facthunter Posted February 12 Posted February 12 Having 'dead' cylinders seems like a silly idea Uneven heat and you still have the bits all rotating and a great heavy engine. Nev 1
spenaroo Posted February 12 Posted February 12 1 hour ago, facthunter said: Having 'dead' cylinders seems like a silly idea Uneven heat and you still have the bits all rotating and a great heavy engine. Nev Now, if only there was a way to use the "dead" pistons as an air pump to supercharge the other still running cylinders... 1
facthunter Posted February 13 Posted February 13 Nah. Just use the whole thing as a boat anchor or artificial reef and be done with it. Nev 1
spacesailor Posted February 13 Posted February 13 Can , Australia use aircraft & helicopters for those reef's. Oops , don't forget those ' annoying ' wind-turbine blades . there must be good in all things . spacesailor 1
facthunter Posted February 17 Posted February 17 Reefs are to give protection for fish to breed.. Flying fish are on the Road to Mandalay so they won't fly into the ANNOYING turbine blades that often. Nev 1
old man emu Posted February 17 Posted February 17 32 minutes ago, facthunter said: Flying fish are on the Road to Mandalay Come you back to Mandalay, Where the old Flotilla lay: Can't you 'ear their paddles chunkin' From Rangoon to Mandalay ? On 13/02/2024 at 11:01 AM, facthunter said: Just use the whole thing as a boat anchor or artificial reef The Old Flotilla is replaced by the old Squadron.
facthunter Posted February 17 Posted February 17 " On the road to Man da lay where the flying fishes Play" Nev
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now